TITEBOND EXTEND WOOD GLUE


Titebond Extend Wood Glue is a slower setting version of Titebond Original Wood Glue. It offers superior performance in a broad range of applications, including edge and face gluing. It is particularly useful in complex operations such as curved railings and other assemblies that require more time to align. Titebond Extend develops ...

more

Features & Benefits

check_circle
Slower speed of set - Longer working time
check_circle
Excellent heat-resistance
check_circle
Water cleanup
check_circle
Versatile - Bonds wood, particleboard, MDF, plywood and other porous materials
check_circle
Ideal for complex assemblies and bent laminations

Application Guidelines

Application Temperature:
Above 40°F (4°C)
Open Assembly Time:
15 minutes (70°F./50%RH)
Total Assembly Time:
20-25 minutes (70°F./50%RH)
Minimum Required Spread :
Approximately 6 mils or 250 square feet per gallon
Required Clamping Pressure:
Enough to bring joints tightly together (generally, 30-80 psi for HPL, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods)
Method of Application:
Easily spread with a roller spreader or brush, or may be transferred to plastic bottles for finer gluing applications.
Cleanup:
Damp cloth while glue is wet. Scrape off and sand dried excess.
Limitations:
Titebond Extend Wood Glue is not intended for exterior use or where moisture is likely. For exterior applications use Titebond III Ultimate Wood Glue or Titebond II Extend. Not for structural of load bearing applications. Do not use when temperature, glue or materials are below 40°F. Freezing may not affect the function of the product but may cause it to thicken. If product appears to have settled, stir to ensure uniformity. It is recommended that Titebond Extend Wood Glue not be stored for extended periods at temperatures lower than 40°F. Read MSDS before use. NOTE: STIR PRODUCT BEFORE USE TO ENSURE UNIFORMITY. KEEP FROM FREEZING.

Physical Properties

Type
Modified PVA emulsion
Calculated VOC
3.12 g/L
State
Liquid
Weight Per Gallon
9.7 lbs.
Color
Yellow
Dried Film
Yellow
Flashpoint
> 200°F
Freeze / Thaw Stability
Stable
Solids
42.3%
Viscosity
3,500 cps
pH
4.8
Chalk Temperature
To assure a good bond, 40°F is the lowest recommended temperature of the glue, air and materials during application.
Storage Life
12 months in tightly closed containers at 70°F

Bond Strength ASTM D-905 (On Hard Maple)

Temperature Strength Wood Failure
Room Temperature 3,510 psi 81%
150°F. Overnight 3,120 psi 61%

Caution Statement

CAUTION: EYE AND SKIN IRRITANT. Contains oxydipropyl dibenzoate. Do not swallow. Do not allow eye contact or prolonged skin contact. FIRST AID: If swallowed, do not induce vomiting; contact physician. If eye contact occurs, flush with water for 15 minutes. Wash skin contact areas with soap and water. If irritation from eye or skin contact persists, contact physician. For additional information, refer to Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.